Sea-Doo 155mm Replacement Wear-Ring (104) (SKU: 003-502)
Sea-Doo 155mm Replacement Wear-Ring (104) (SKU: 003-502)
Specifications
Specifications
Sea-Doo 155mm Replacement Wear Ring (104) | WSM 003-502
The WSM 003-502 Sea-Doo 155mm Replacement Wear Ring is a high-quality aftermarket replacement designed for Sea-Doo personal watercraft equipped with 155mm jet pumps. Commonly found on 1494cc 4-Tec models producing 155 HP and 185 HP, this wear ring restores proper impeller clearance and helps maintain maximum jet pump efficiency at a fraction of OEM replacement cost.
As a wear ring becomes worn from normal use, cavitation, rocks, sand, or debris, the gap between the impeller and wear ring increases. Excessive clearance allows water to bypass the impeller blades, resulting in cavitation, poor acceleration, reduced hook-up, and loss of top speed. Replacing a worn wear ring is one of the most effective ways to restore lost performance and improve overall ride quality.
Manufactured from durable marine-grade composite material, the WSM wear ring is engineered to meet or exceed OEM specifications while providing reliable performance and long service life in both freshwater and saltwater environments.
Features
The WSM 003-502 wear ring is designed as a direct replacement for Sea-Doo 155mm pump systems. Precision manufacturing restores proper impeller-to-wear-ring clearance, helping maximize pump efficiency and overall watercraft performance.
Benefits
Reduces cavitation, restores acceleration, improves pump hook-up, enhances throttle response, and helps maintain top speed. Cost-effective alternative to OEM replacement parts.
Replaces OEM Part Number
- Sea-Doo 267000104
Common Applications
- Sea-Doo GTI
- Sea-Doo GTX 4-Tec
- Sea-Doo GTX Supercharged
- Sea-Doo GTX Wake
- Sea-Doo Wake Models
- Sea-Doo 155 HP Models
- Sea-Doo 185 HP Models
- Other Sea-Doo Watercraft Equipped with 155mm Pumps
Common Symptoms of a Worn Wear Ring
- Cavitation During Takeoff
- Reduced Acceleration
- Poor Pump Hook-Up
- Loss of Top Speed
- Excessive Impeller Clearance
- Reduced Pump Efficiency
Why Replace Your Wear Ring?
A properly fitted wear ring is critical for jet pump performance. Replacing a worn wear ring restores pump efficiency, reduces cavitation, improves acceleration, and helps your Sea-Doo perform like new.
Part Number
WSM 003-502
Models
Models
Application fits models listed below:
Challenger SE 260 2012
Challenger SE 155 2012
Challenger SE 310 2010-2011
Challenger S 260 2012
Challenger S 155 2012
Challenger SP 310 2010-2011
Explorer Pro 170 2023
Fish Pro 155 2019
Fish Pro Scout 130 2022-2023
Fish Pro Sport 170 2022-2023
Fish Pro Trophy 170 2022-2023
GTI 2015
GTI 130 2008-2015
GTI LTD 2014
GTI LTD 155 2011-2017
GTI P LTD 155 2018
GTIP SE 130 2018
GTI P SE 155 2018
GTI Rental 2010
GTI SE 2006,2019
GTI SE 130 2008-2017
GTI SE 130 2020-2023
GTI SE 155 2008-2017
GTI SE 170 2020-2023
GTI SE DT 2007
GTI SE NA 2007,2019
GTI STD 2006,2019
GTI STD 130 2020-2023
GTI STD 155 2017
GTI STD DT 2007
GTS 2015
GTS 130 2011-2014
GTS DT 2014
GTS Rental 2012-2013
GTX 155 2008-2013,2015
GTX 155 STD 2014
GTX Fish Pro 170 2020-2021
GTX LTD S/C 2004
GTX P STD 155 2018
GTX S 155 2012-2013, 2015
GTX S/C 2004
GTX STD 2004-2006
GTX STD 155 2017
GTX STD 170 2020-2023
GTX STD NA 2007,2019
GTX Wake 2004-2006
GTX Wake NA 2007
GTXS STD 155 2017
RXP 155 2008
RXP NA 2007
SP 2 x 155 2012
Speedster 155 2012
Speedster 155 2010-2011
Speedster 200 2004
Sportster 155 2004
Wake 155 2008-2016
Wake 2 155 2012
Wake 310 2010-2011
Wake P STD 155 2018
Wake STD 155 2017
Wake STD 170 2020-2023
Wake STD NA 2019
Model Years
Model Years
- 2004
- 2005
- 2006
- 2007
- 2008
- 2009
- 2010
- 2011
- 2012
- 2013
- 2014
- 2015
- 2016
Engine
Engine
1494
FAQs
See All
How do I change the impeller in my craft?
Impros has complete impeller installation instructions for Yamaha, Sea-Doo, Kawasaki and Polaris PWC. See Impeller Installation instructions for the person that likes to get in there and do things themselves.
Does Impros balance each impeller they service?
Yes. Each and every impeller that we service is checked for accurate balance within 2/10ths of a gram. Slight rock damage and especially with impellers requiring weld, checking the balance is absolutely required with PWC impellers. Sometimes we’ll find new impellers out of balance right out of the box. We balance each impeller as the finish is applied, eliminating any chance of throwing it out of balance during the polishing process. These measures are proudly taken to insure our customers the highest quality impeller repair available. Ask our competition if and how they balance impellers, we’ve found that they typically rely on the original factory balance.
Does Impros use correct pitching techniques specific to each brand of impeller?
Yes, Impros is proud of our ability to pitch each brand impeller to the manufacture’s specific range of blade angle variation. Impros has a master gauge for every stainless-steel impeller made, assuring an accurate pitch and uncompromised performance, eliminating common guesswork. Each and every manufacturer builds the impeller geometrically different from one another and gauges the outer blade angle in a different way. Only a company with experience will accurately understand, manipulate and repair the blades of the impeller to its original state.
Customer Reviews
-
The best there is!! If you want true personalized impeller and/or pump service this is it. One word describes it all: Quality."
Tim C.Verified Customer -
"Big thank you to Glen for the quick turnaround, outstanding customer service, and honesty. I ended up choosing the race finish and couldn't be happier with the final result!"
C. KunamayVerified Customer -
"Solid support when I had an issue. Immediately fixed. Wish all businesses operated like this, thanks!"
John H.Verified Customer
Sea-Doo 155mm Replacement Wear-Ring (104) (SKU: 003-502)
Sea-Doo 155mm Replacement Wear Ring (104) | WSM 003-502
The WSM 003-502 Sea-Doo 155mm Replacement Wear Ring is a high-quality aftermarket replacement designed for Sea-Doo personal watercraft equipped with 155mm jet pumps. Commonly found on 1494cc 4-Tec models producing 155 HP and 185 HP, this wear ring restores proper impeller clearance and helps maintain maximum jet pump efficiency at a fraction of OEM replacement cost.
As a wear ring becomes worn from normal use, cavitation, rocks, sand, or debris, the gap between the impeller and wear ring increases. Excessive clearance allows water to bypass the impeller blades, resulting in cavitation, poor acceleration, reduced hook-up, and loss of top speed. Replacing a worn wear ring is one of the most effective ways to restore lost performance and improve overall ride quality.
Manufactured from durable marine-grade composite material, the WSM wear ring is engineered to meet or exceed OEM specifications while providing reliable performance and long service life in both freshwater and saltwater environments.
Features
The WSM 003-502 wear ring is designed as a direct replacement for Sea-Doo 155mm pump systems. Precision manufacturing restores proper impeller-to-wear-ring clearance, helping maximize pump efficiency and overall watercraft performance.
Benefits
Reduces cavitation, restores acceleration, improves pump hook-up, enhances throttle response, and helps maintain top speed. Cost-effective alternative to OEM replacement parts.
Replaces OEM Part Number
- Sea-Doo 267000104
Common Applications
- Sea-Doo GTI
- Sea-Doo GTX 4-Tec
- Sea-Doo GTX Supercharged
- Sea-Doo GTX Wake
- Sea-Doo Wake Models
- Sea-Doo 155 HP Models
- Sea-Doo 185 HP Models
- Other Sea-Doo Watercraft Equipped with 155mm Pumps
Common Symptoms of a Worn Wear Ring
- Cavitation During Takeoff
- Reduced Acceleration
- Poor Pump Hook-Up
- Loss of Top Speed
- Excessive Impeller Clearance
- Reduced Pump Efficiency
Why Replace Your Wear Ring?
A properly fitted wear ring is critical for jet pump performance. Replacing a worn wear ring restores pump efficiency, reduces cavitation, improves acceleration, and helps your Sea-Doo perform like new.
Part Number
WSM 003-502