144mm Impros Yamaha NEW SJ Hooker Impeller (SKU: IMY4SJ144)
144mm Impros Yamaha NEW SJ Hooker Impeller (SKU: IMY4SJ144)
Specifications
The *ORIGINAL* Impros Hooker impeller for the newer Yamaha Super Jet models! Set back, and a large hub design that works with the newly designed stock 144mm pump that comes on the 2021 Superjet.
The Impros Hooker impeller was made specifically for the 2021-2023 Yamaha Super Jets is a 3-blade large hub diameter, radial edge design stainless steel impeller designed to improve the overall performance of your ski. We gave it this name because it "hooks up" so well.
Dynamically balanced, comes with our recreation polish, and a rubber nose seal.
We have it available in a variety of pitches for different engine set ups. These numbers are much different from other impeller pitches. We offer the 11/17 pitch for stock skis, and if you have a tune, we suggest the 10/16 pitch. We even offer our low pitched 9/15 for certain tunes, and for higher elevation riding. To produce "more aggressive" choose a custom pitch for engines that require it, for an additional charge.
We recommend also buying a WR001 impeller tool as well, for ease of installation.
*Impros, LLC Hookers purchased from anywhere other than an Authorized Impros, LLC Dealer is not covered under our warranty. Impros, LLC relinquishes all responsibility for poor performance or damage caused, choose where you buy wisely!
We will custom pitch your impeller to meet your needs, are you riding at elevation or with a tune? Let us know and we’ll pitch it so you’re getting top performance!
Want to check if this application is best for your set-up? Email us impros@impros.com with specific details on your set-up and we'll get back to you ASAP!
*We cannot guarantee speed or RPM, due to a multitude of variables that can help/hinder performance of any given personal watercraft, all speed and RPM increase or decreases are gauges.
Models
Application fits models listed below:
SuperJet 2021-2023
Model Years
Engine
1050|1052
Pitch Availability
IMYJ-144-9/15|IMYJ-144-10/16|IMYJ-144-11/17
FAQs
See All
How do I change the impeller in my craft?
Impros has complete impeller installation instructions for Yamaha, Sea-Doo, Kawasaki and Polaris PWC. See Impeller Installation instructions for the person that likes to get in there and do things themselves.
Does Impros balance each impeller they service?
Yes. Each and every impeller that we service is checked for accurate balance within 2/10ths of a gram. Slight rock damage and especially with impellers requiring weld, checking the balance is absolutely required with PWC impellers. Sometimes we’ll find new impellers out of balance right out of the box. We balance each impeller as the finish is applied, eliminating any chance of throwing it out of balance during the polishing process. These measures are proudly taken to insure our customers the highest quality impeller repair available. Ask our competition if and how they balance impellers, we’ve found that they typically rely on the original factory balance.
Does Impros use correct pitching techniques specific to each brand of impeller?
Yes, Impros is proud of our ability to pitch each brand impeller to the manufacture’s specific range of blade angle variation. Impros has a master gauge for every stainless-steel impeller made, assuring an accurate pitch and uncompromised performance, eliminating common guesswork. Each and every manufacturer builds the impeller geometrically different from one another and gauges the outer blade angle in a different way. Only a company with experience will accurately understand, manipulate and repair the blades of the impeller to its original state.
Customer Reviews
-
The best there is!! If you want true personalized impeller and/or pump service this is it. One word describes it all: Quality."Tim C.Verified Customer
-
"Big thank you to Glen for the quick turnaround, outstanding customer service, and honesty. I ended up choosing the race finish and couldn't be happier with the final result!"C. KunamayVerified Customer
-
"Solid support when I had an issue. Immediately fixed. Wish all businesses operated like this, thanks!"John H.Verified Customer
144mm Impros Yamaha NEW SJ Hooker Impeller (SKU: IMY4SJ144)
144mm Impros Yamaha NEW SJ Hooker Impeller (SKU: IMY4SJ144)
The *ORIGINAL* Impros Hooker impeller for the newer Yamaha Super Jet models! Set back, and a large hub design that works with the newly designed stock 144mm pump that comes on the 2021 Superjet.
The Impros Hooker impeller was made specifically for the 2021-2023 Yamaha Super Jets is a 3-blade large hub diameter, radial edge design stainless steel impeller designed to improve the overall performance of your ski. We gave it this name because it "hooks up" so well.
Dynamically balanced, comes with our recreation polish, and a rubber nose seal.
We have it available in a variety of pitches for different engine set ups. These numbers are much different from other impeller pitches. We offer the 11/17 pitch for stock skis, and if you have a tune, we suggest the 10/16 pitch. We even offer our low pitched 9/15 for certain tunes, and for higher elevation riding. To produce "more aggressive" choose a custom pitch for engines that require it, for an additional charge.
We recommend also buying a WR001 impeller tool as well, for ease of installation.
*Impros, LLC Hookers purchased from anywhere other than an Authorized Impros, LLC Dealer is not covered under our warranty. Impros, LLC relinquishes all responsibility for poor performance or damage caused, choose where you buy wisely!
We will custom pitch your impeller to meet your needs, are you riding at elevation or with a tune? Let us know and we’ll pitch it so you’re getting top performance!
Want to check if this application is best for your set-up? Email us impros@impros.com with specific details on your set-up and we'll get back to you ASAP!
*We cannot guarantee speed or RPM, due to a multitude of variables that can help/hinder performance of any given personal watercraft, all speed and RPM increase or decreases are gauges.