Skip to product information
1 of 1

Impros Yamaha 144/75 Hooker (SKU: IMY144)

Impros Yamaha 144/75 Hooker (SKU: IMY144)

Regular price $399.95
Sale price $399.95 Regular price

Hurry up! Offer ends in
00 Days
00 Hours
00 Minutes
00 Seconds

Specifications

The Impros Hooker 144mm impeller for the Yamaha is a 3-blade large hub diameter, radial edge design stainless steel impeller designed and intended for Bottom end and "Hook up" for Freestyle and Freeriders on a Super Jet, Blaster, or similar ski that utilizes the 144mm pump and want maximum AIR for tricks.

Designed around maximizing pump efficiency and bottom end, this is a new radial edge design, large hub (75mm), and is set back 5mm (2mm further than we can go with a small hub impeller). It is a rec finish Yamaha impeller that we will have available for the 144mm stock pump, and 144/142/140mm Magnum pump. Designed with a steep root angle to load the pump well.

Material is a 17-4 stainless steel cast. Dynamically balanced, comes with our Recreation polish, and with an impeller tool and rubber nose seal.

We have it available in a variety of pitches for different engine set ups. The pitches available are 9/15, 10/16 and 11/17. These numbers are much different from other impeller pitches you have heard of. While they are very low, and directed at bottom end "Hit", the root angle, blade length and other geometric differences set the Hooker apart from the others. We also produce "more aggressive" custom pitch Hookers for engines that require it, for an additional charge.

The 10/16 and 11/17 Hooker has also been one of the most competitive impellers used for closed course racing limited and spec class Super Jets and Blasters.

As stated above, they fit in the stock 144mm Yamaha pump, Solas 12 vane pump, Skat Trak Magnum pumps (with a shim), and TBM Super Pump Cones.

Hex tool, rubber nose seal and Impros Hooker sticker included in purchase price. We recommend also buying a Driveshaft holding tool (WR004H) as well, for ease of installation.

*Impros, LLC Hookers purchased from anywhere other than an Authorized Impros, LLC Dealer is not covered under our warranty. Impros, LLC relinquishes all responsibility for poor performance or damage caused, choose where you buy wisely!

We will custom pitch your impeller to meet your needs, are you riding at elevation or with a tune? Let us know and we’ll pitch it so you’re getting top performance!

*We cannot guarantee speed or RPM, due to a multitude of variables that can help/hinder performance of any given personal watercraft, all speed and RPM increase or decreases are gauges.

Impros Yamaha 144/75 Hooker (SKU: IMY144)

Models

Application fits models listed below:
Super Jet 1990-2020
Wave Blaster 1993-1996

Model Years

  • 1990
  • 1991
  • 1992
  • 1994
  • 1995
  • 1996
  • 2000
  • 2001
  • 2002
  • 2003
  • 2004
  • 2005
  • 2006
  • 2007
  • 2008
  • 2009
  • 2010

Engine

701, 754, 760, 784, 800

Pitch Availability

10/16, 11/17, 9/15

How do I change the impeller in my craft?

Impros has complete impeller installation instructions for Yamaha, Sea-Doo, Kawasaki and Polaris PWC. See Impeller Installation instructions for the person that likes to get in there and do things themselves.

Does Impros balance each impeller they service?

Yes. Each and every impeller that we service is checked for accurate balance within 2/10ths of a gram. Slight rock damage and especially with impellers requiring weld, checking the balance is absolutely required with PWC impellers. Sometimes we’ll find new impellers out of balance right out of the box. We balance each impeller as the finish is applied, eliminating any chance of throwing it out of balance during the polishing process. These measures are proudly taken to insure our customers the highest quality impeller repair available. Ask our competition if and how they balance impellers, we’ve found that they typically rely on the original factory balance.

Does Impros use correct pitching techniques specific to each brand of impeller?

Yes, Impros is proud of our ability to pitch each brand impeller to the manufacture’s specific range of blade angle variation. Impros has a master gauge for every stainless-steel impeller made, assuring an accurate pitch and uncompromised performance, eliminating common guesswork. Each and every manufacturer builds the impeller geometrically different from one another and gauges the outer blade angle in a different way. Only a company with experience will accurately understand, manipulate and repair the blades of the impeller to its original state.

Customer Reviews

  • The best there is!! If you want true personalized impeller and/or pump service this is it. One word describes it all: Quality."
    testimonial author avatar
    Tim C.
    Verified Customer
  • "Big thank you to Glen for the quick turnaround, outstanding customer service, and honesty. I ended up choosing the race finish and couldn't be happier with the final result!"
    testimonial author avatar
    C. Kunamay
    Verified Customer
  • "Solid support when I had an issue. Immediately fixed. Wish all businesses operated like this, thanks!"
    testimonial author avatar
    John H.
    Verified Customer
Impros Yamaha 144/75 Hooker (SKU: IMY144)

Impros Yamaha 144/75 Hooker (SKU: IMY144)

Regular price $399.95
Sale price $399.95 Regular price