Solas YD-CD Jet Boat Impeller (SKU: YD-CD-JB)
Solas YD-CD Jet Boat Impeller (SKU: YD-CD-JB)
Specifications
Specifications
Solas YD-CD Concord Impeller for Yamaha Jet Boats & WaveRunner 155mm Pump Applications
Upgrade your Yamaha jet boat or WaveRunner with the proven Solas YD-CD Concord impeller, one of the most trusted performance impellers for older Yamaha 155mm pump applications. Designed to improve acceleration, hook-up, rough water handling, and top-speed performance, this high-performance stainless steel impeller is ideal for Yamaha setups using a 155mm pump with a 20mm driveshaft.
The Solas Concord blade design has built a strong reputation for delivering excellent low-end power, smoother throttle response, improved pump efficiency, and reliable performance in rough water conditions. Whether you're looking for stronger acceleration, improved towing power, or better overall drivability, the YD-CD impeller is a proven upgrade for Yamaha jet boat and WaveRunner applications.
Each impeller is custom pitched by Impros based on your specific setup, riding conditions, elevation, and engine modifications to help optimize RPM, acceleration, and overall on-water performance. Whether your Yamaha is stock, tuned, or modified, Impros can fine-tune the pitch for maximum efficiency and performance.
This Solas YD-CD Concord impeller is designed for Yamaha 155mm pump systems using a 20mm shaft and fits many Yamaha WaveRunner and Yamaha jet boat applications listed below.
Each impeller purchase includes:
- Aluminum Nose Boot
- Impeller Spline Tool
For easier installation and removal, Impros recommends purchasing the WR004H driveshaft holding tool.
Not sure if this impeller is right for your setup? Check out the Solas Application Charts or contact Impros for expert recommendations tailored to your Yamaha application.
Features:
- Solas YD-CD Concord Performance Impeller
- Fits Yamaha 155mm Pump Applications
- Compatible with 20mm Driveshaft Setups
- Improves Acceleration & Throttle Response
- Enhances Hook-Up & Rough Water Performance
- Helps Increase Pump Efficiency
- Proven Concord Blade Design
- Custom Pitching Available
- Includes Aluminum Nose Boot & Impeller Tool
- Ideal for Yamaha Jet Boats & WaveRunner Models
Recommended Optional Tool:
- WR004H Driveshaft Holding Tool for Easier Installation
Performance Disclaimer:
Actual speed, RPM, and performance results may vary depending on elevation, engine modifications, water conditions, rider/passenger load, pump condition, and overall watercraft setup.
Models
Models
Application fits models listed below:
210 AR 2003-2005
210 LX 2003-2005
LS 2000 1999-2003
LX 2000 1999-2003
Exciter 270 1998-2000
Exciter 220 1997-1998
Exciter 135 1998-2000
Model Years
Model Years
- 1995
- 1996
- 1997
- 1998
- 1999
- 2000
- 2001
- 2002
- 2003
- 2004
Engine
Engine
1100, 1131, 1200, 700, 701, 760
Pitch Availability
Pitch Availability
YD-CD 11/14, YD-CD 12/18, YD-CD 13/19, YD-CD 14/20
FAQs
See All
How do I change the impeller in my craft?
Impros has complete impeller installation instructions for Yamaha, Sea-Doo, Kawasaki and Polaris PWC. See Impeller Installation instructions for the person that likes to get in there and do things themselves.
Does Impros balance each impeller they service?
Yes. Each and every impeller that we service is checked for accurate balance within 2/10ths of a gram. Slight rock damage and especially with impellers requiring weld, checking the balance is absolutely required with PWC impellers. Sometimes we’ll find new impellers out of balance right out of the box. We balance each impeller as the finish is applied, eliminating any chance of throwing it out of balance during the polishing process. These measures are proudly taken to insure our customers the highest quality impeller repair available. Ask our competition if and how they balance impellers, we’ve found that they typically rely on the original factory balance.
Does Impros use correct pitching techniques specific to each brand of impeller?
Yes, Impros is proud of our ability to pitch each brand impeller to the manufacture’s specific range of blade angle variation. Impros has a master gauge for every stainless-steel impeller made, assuring an accurate pitch and uncompromised performance, eliminating common guesswork. Each and every manufacturer builds the impeller geometrically different from one another and gauges the outer blade angle in a different way. Only a company with experience will accurately understand, manipulate and repair the blades of the impeller to its original state.
Customer Reviews
-
The best there is!! If you want true personalized impeller and/or pump service this is it. One word describes it all: Quality."
Tim C.Verified Customer -
"Big thank you to Glen for the quick turnaround, outstanding customer service, and honesty. I ended up choosing the race finish and couldn't be happier with the final result!"
C. KunamayVerified Customer -
"Solid support when I had an issue. Immediately fixed. Wish all businesses operated like this, thanks!"
John H.Verified Customer
Solas YD-CD Jet Boat Impeller (SKU: YD-CD-JB)
Solas YD-CD Concord Impeller for Yamaha Jet Boats & WaveRunner 155mm Pump Applications
Upgrade your Yamaha jet boat or WaveRunner with the proven Solas YD-CD Concord impeller, one of the most trusted performance impellers for older Yamaha 155mm pump applications. Designed to improve acceleration, hook-up, rough water handling, and top-speed performance, this high-performance stainless steel impeller is ideal for Yamaha setups using a 155mm pump with a 20mm driveshaft.
The Solas Concord blade design has built a strong reputation for delivering excellent low-end power, smoother throttle response, improved pump efficiency, and reliable performance in rough water conditions. Whether you're looking for stronger acceleration, improved towing power, or better overall drivability, the YD-CD impeller is a proven upgrade for Yamaha jet boat and WaveRunner applications.
Each impeller is custom pitched by Impros based on your specific setup, riding conditions, elevation, and engine modifications to help optimize RPM, acceleration, and overall on-water performance. Whether your Yamaha is stock, tuned, or modified, Impros can fine-tune the pitch for maximum efficiency and performance.
This Solas YD-CD Concord impeller is designed for Yamaha 155mm pump systems using a 20mm shaft and fits many Yamaha WaveRunner and Yamaha jet boat applications listed below.
Each impeller purchase includes:
- Aluminum Nose Boot
- Impeller Spline Tool
For easier installation and removal, Impros recommends purchasing the WR004H driveshaft holding tool.
Not sure if this impeller is right for your setup? Check out the Solas Application Charts or contact Impros for expert recommendations tailored to your Yamaha application.
Features:
- Solas YD-CD Concord Performance Impeller
- Fits Yamaha 155mm Pump Applications
- Compatible with 20mm Driveshaft Setups
- Improves Acceleration & Throttle Response
- Enhances Hook-Up & Rough Water Performance
- Helps Increase Pump Efficiency
- Proven Concord Blade Design
- Custom Pitching Available
- Includes Aluminum Nose Boot & Impeller Tool
- Ideal for Yamaha Jet Boats & WaveRunner Models
Recommended Optional Tool:
- WR004H Driveshaft Holding Tool for Easier Installation
Performance Disclaimer:
Actual speed, RPM, and performance results may vary depending on elevation, engine modifications, water conditions, rider/passenger load, pump condition, and overall watercraft setup.