• Impros Freestyle Cone (Solas Yamaha Pump) (SKU: IMYQ-FC)
1 1

Impros Freestyle Cone (Solas Yamaha Pump) (SKU: IMYQ-FC)

Impros Freestyle Cone (Solas Yamaha Pump) (SKU: IMYQ-FC)

$60.49
$60.49

Hurry up! Offer ends in
00 Days
00 Hours
00 Minutes
00 Seconds

Specifications

Impros Freestyle Cone for Solas Yamaha 144mm 12-Vane Pump (SKU: IMYQ-FC)

The Impros Freestyle Cone is a performance-tuned billet aluminum pump cone designed specifically for the Solas 144mm 12-vane Yamaha pump with the 75mm bearing carrier. Developed for freestyle, freeride, surf, and high-performance stand-up riding, this shorter cone design improves low-end power, midrange acceleration, and throttle response by allowing the engine to rev faster than with the stock Solas cone.

The factory cone supplied with the Solas pump is often too long for aggressive freestyle applications, creating additional pump loading that can limit engine responsiveness. The Impros Freestyle Cone reduces pump load, helping the engine accelerate through the RPM range more quickly while improving overall pump performance.

This simple upgrade is one of the most effective and affordable ways to improve bottom-end power and responsiveness on a freestyle or freeride ski. Riders will notice quicker throttle response, stronger acceleration, and improved performance during tricks, wave riding, and aggressive maneuvering.

Precision-machined from marine-grade billet aluminum, the IMYQ-FC offers exceptional strength, corrosion resistance, and long-term durability in both freshwater and saltwater environments.

Features:

  • Impros Freestyle Pump Cone
  • Designed for Solas 144mm 12-Vane Yamaha Pumps
  • Fits 75mm Bearing Carrier Applications
  • Precision Billet Aluminum Construction
  • Shorter Than Stock Solas Cone
  • Improves Low-End & Midrange Performance
  • Allows Faster Engine RPM Build-Up
  • Enhances Throttle Response
  • Improves Acceleration & Pump Efficiency
  • Corrosion Resistant Marine-Grade Aluminum
  • Ideal for Freestyle & Freeride Riding

Benefits:

  • Stronger Bottom-End Power
  • Improved Midrange Pull
  • Faster Engine Response
  • Better Freestyle Performance
  • Enhanced Wave Riding Capability
  • Affordable Performance Upgrade

Common Applications:

  • Yamaha SuperJet
  • Yamaha WaveBlaster
  • Freestyle SuperJet Builds
  • Freeride Watercraft
  • Solas 144mm 12-Vane Pump Systems

Important Fitment Note:

Fits ONLY Solas 144mm 12-vane pumps equipped with a 75mm bearing carrier.

SKU:

  • IMYQ-FC

Models

Impros NEW Freestlye stubby cone for the NEW Solas 12 vane 144mm pump!!
Increase bottom end hit and quicker throttle response!
The shorter cone also allows slightly higher engine rpm. Designed with the freestyler in mind, the Freestyle pump cone allows the engine to rev faster for the big tricks. Its small size lets a large volume of water move through the pump with less restriction than with the stock tailcone. This gives you more low end thrust for bigger trix!! Works great with a bored out stock nozzle to help provide even more low end.
Billet aluminum- ONLY at Impros
Fits: ONLY the Solas 144mm 12 vane pump with 75mm bearing carrier.
Typical application- Yamaha Super Jet, WaveBlaster
PN# IMYQ-FC

Model Years

  • 1990
  • 1991
  • 1992
  • 1994
  • 1995
  • 1996
  • 2000
  • 2001
  • 2002
  • 2003
  • 2004
  • 2005
  • 2006
  • 2007
  • 2008
  • 2009
  • 2010

Engine

1100|650|700|760|784|800

FAQs

See All

How do I change the impeller in my craft?

Impros has complete impeller installation instructions for Yamaha, Sea-Doo, Kawasaki and Polaris PWC. See Impeller Installation instructions for the person that likes to get in there and do things themselves.

Does Impros balance each impeller they service?

Yes. Each and every impeller that we service is checked for accurate balance within 2/10ths of a gram. Slight rock damage and especially with impellers requiring weld, checking the balance is absolutely required with PWC impellers. Sometimes we’ll find new impellers out of balance right out of the box. We balance each impeller as the finish is applied, eliminating any chance of throwing it out of balance during the polishing process. These measures are proudly taken to insure our customers the highest quality impeller repair available. Ask our competition if and how they balance impellers, we’ve found that they typically rely on the original factory balance.

Does Impros use correct pitching techniques specific to each brand of impeller?

Yes, Impros is proud of our ability to pitch each brand impeller to the manufacture’s specific range of blade angle variation. Impros has a master gauge for every stainless-steel impeller made, assuring an accurate pitch and uncompromised performance, eliminating common guesswork. Each and every manufacturer builds the impeller geometrically different from one another and gauges the outer blade angle in a different way. Only a company with experience will accurately understand, manipulate and repair the blades of the impeller to its original state.

Customer Reviews

  • The best there is!! If you want true personalized impeller and/or pump service this is it. One word describes it all: Quality."
    testimonial author avatar
    Tim C.
    Verified Customer
  • "Big thank you to Glen for the quick turnaround, outstanding customer service, and honesty. I ended up choosing the race finish and couldn't be happier with the final result!"
    testimonial author avatar
    C. Kunamay
    Verified Customer
  • "Solid support when I had an issue. Immediately fixed. Wish all businesses operated like this, thanks!"
    testimonial author avatar
    John H.
    Verified Customer