Solas SXX-CD SeaDoo Jet Boat Concord Impeller (SKU: SXX-SDJB)
Solas SXX-CD SeaDoo Jet Boat Concord Impeller (SKU: SXX-SDJB)
Specifications
Specifications
Solas SXX Concord Cut-Down 159mm Impeller for Sea-Doo 180, 210 & 230 SP Jet Boats
Upgrade your Sea-Doo jet boat with the Solas SXX Concord Cut-Down 159mm Impeller, precision-designed to improve acceleration, hook-up, throttle response, and overall pump efficiency for Sea-Doo 180 SP, 210 SP, and 230 SP jet boat models. Engineered for 159mm pump systems with the larger 28mm driveshaft configuration, this high-performance stainless steel impeller delivers improved drivability and smoother on-water performance.
The Solas SXX Concord cut-down design is optimized to increase water flow efficiency while helping reduce cavitation and improve low-end pull. Whether you're cruising, towing, carrying passengers, or looking for improved overall responsiveness, this impeller setup is built to maximize performance across a variety of riding conditions.
Each impeller setup includes an aluminum nose boot and is professionally custom pitched by Impros to match your exact application. Whether your boat operates at elevation, has aftermarket tuning, or additional engine modifications, Impros can fine-tune the impeller pitch to help optimize RPM, acceleration, and overall performance.
This setup is specifically designed for Sea-Doo jet boats using 159mm pumps and larger 28mm driveshafts commonly found on 180 SP, 210 SP, and 230 SP models.
Looking for a Scarab jet boat setup? Check out the SXX-CD Scarab impeller option designed specifically for Scarab applications.
Not sure if this impeller is the right fit for your setup? Review the Solas Application Charts or contact Impros for expert recommendations tailored to your boat configuration.
Features:
- Solas SXX Concord Cut-Down 159mm Impeller
- Fits Sea-Doo 180 SP, 210 SP & 230 SP Jet Boats
- Designed for 159mm Pump Applications
- Compatible with 28mm Driveshaft Setups
- Improves Acceleration & Throttle Response
- Enhances Hook-Up & Pump Efficiency
- Helps Reduce Cavitation
- Custom Pitching Available
- Includes Aluminum Nose Boot
- Ideal for Recreational & Performance Applications
Performance Disclaimer:
Actual speed, RPM, and performance results may vary depending on elevation, engine modifications, water conditions, passenger load, pump condition, and overall boat setup.
Models
Models
Application fits models listed below:
180SP 260hp 2012
230SP 260/215hp 2011-2012
210SP 215hp 2011-2012
Model Years
Model Years
- 2011
- 2012
- 2015
- 2016
- 2017
- 2018
- 2019
- 2020
- 2021
- 2022
- 2023
- 2024
Pitch Availability
Pitch Availability
SXX-CD 13/16, SXX-CD 13/18
FAQs
See All
How do I change the impeller in my craft?
Impros has complete impeller installation instructions for Yamaha, Sea-Doo, Kawasaki and Polaris PWC. See Impeller Installation instructions for the person that likes to get in there and do things themselves.
Does Impros balance each impeller they service?
Yes. Each and every impeller that we service is checked for accurate balance within 2/10ths of a gram. Slight rock damage and especially with impellers requiring weld, checking the balance is absolutely required with PWC impellers. Sometimes we’ll find new impellers out of balance right out of the box. We balance each impeller as the finish is applied, eliminating any chance of throwing it out of balance during the polishing process. These measures are proudly taken to insure our customers the highest quality impeller repair available. Ask our competition if and how they balance impellers, we’ve found that they typically rely on the original factory balance.
Does Impros use correct pitching techniques specific to each brand of impeller?
Yes, Impros is proud of our ability to pitch each brand impeller to the manufacture’s specific range of blade angle variation. Impros has a master gauge for every stainless-steel impeller made, assuring an accurate pitch and uncompromised performance, eliminating common guesswork. Each and every manufacturer builds the impeller geometrically different from one another and gauges the outer blade angle in a different way. Only a company with experience will accurately understand, manipulate and repair the blades of the impeller to its original state.
Customer Reviews
-
The best there is!! If you want true personalized impeller and/or pump service this is it. One word describes it all: Quality."
Tim C.Verified Customer -
"Big thank you to Glen for the quick turnaround, outstanding customer service, and honesty. I ended up choosing the race finish and couldn't be happier with the final result!"
C. KunamayVerified Customer -
"Solid support when I had an issue. Immediately fixed. Wish all businesses operated like this, thanks!"
John H.Verified Customer
Solas SXX-CD SeaDoo Jet Boat Concord Impeller (SKU: SXX-SDJB)
Solas SXX Concord Cut-Down 159mm Impeller for Sea-Doo 180, 210 & 230 SP Jet Boats
Upgrade your Sea-Doo jet boat with the Solas SXX Concord Cut-Down 159mm Impeller, precision-designed to improve acceleration, hook-up, throttle response, and overall pump efficiency for Sea-Doo 180 SP, 210 SP, and 230 SP jet boat models. Engineered for 159mm pump systems with the larger 28mm driveshaft configuration, this high-performance stainless steel impeller delivers improved drivability and smoother on-water performance.
The Solas SXX Concord cut-down design is optimized to increase water flow efficiency while helping reduce cavitation and improve low-end pull. Whether you're cruising, towing, carrying passengers, or looking for improved overall responsiveness, this impeller setup is built to maximize performance across a variety of riding conditions.
Each impeller setup includes an aluminum nose boot and is professionally custom pitched by Impros to match your exact application. Whether your boat operates at elevation, has aftermarket tuning, or additional engine modifications, Impros can fine-tune the impeller pitch to help optimize RPM, acceleration, and overall performance.
This setup is specifically designed for Sea-Doo jet boats using 159mm pumps and larger 28mm driveshafts commonly found on 180 SP, 210 SP, and 230 SP models.
Looking for a Scarab jet boat setup? Check out the SXX-CD Scarab impeller option designed specifically for Scarab applications.
Not sure if this impeller is the right fit for your setup? Review the Solas Application Charts or contact Impros for expert recommendations tailored to your boat configuration.
Features:
- Solas SXX Concord Cut-Down 159mm Impeller
- Fits Sea-Doo 180 SP, 210 SP & 230 SP Jet Boats
- Designed for 159mm Pump Applications
- Compatible with 28mm Driveshaft Setups
- Improves Acceleration & Throttle Response
- Enhances Hook-Up & Pump Efficiency
- Helps Reduce Cavitation
- Custom Pitching Available
- Includes Aluminum Nose Boot
- Ideal for Recreational & Performance Applications
Performance Disclaimer:
Actual speed, RPM, and performance results may vary depending on elevation, engine modifications, water conditions, passenger load, pump condition, and overall boat setup.