• Skat-Trak SYT22/25 Yamaha Impeller Hex Tool (SKU: SYT22)
1 1

Skat-Trak SYT22/25 Yamaha Impeller Hex Tool (SKU: SYT22)

Skat-Trak SYT22/25 Yamaha Impeller Hex Tool (SKU: SYT22)

$55.00
$55.00

Hurry up! Offer ends in
00 Days
00 Hours
00 Minutes
00 Seconds

Specifications

Skat-Trak SYT22/25 Yamaha Impeller Hex Tool | Yamaha 155mm Pump Impeller Tool

The Skat-Trak SYT22/25 Yamaha Impeller Hex Tool is specifically designed for removing and installing Skat-Trak Yamaha performance impellers used in 155mm jet pump systems with 22mm and 25mm driveshafts. This precision-machined hex tool fits securely into the front of compatible Skat-Trak impellers, allowing safe and efficient impeller service during maintenance, repairs, pump rebuilds, and performance upgrades.

Whether you're servicing a Yamaha GPR1200, GPR1300, FX140, FX HO, XLT 800, XLT 1200, or other compatible Yamaha watercraft, the SYT22/25 provides the proper engagement needed to safely remove and install your impeller without damaging the hub or pump components.

While this tool is often included with new Skat-Trak impellers, it is also available separately as a replacement or spare service tool.

Features

The SYT22/25 is precision-machined to fit compatible Skat-Trak Yamaha impellers utilizing 22mm and 25mm driveshaft configurations. Heavy-duty construction provides reliable engagement and long service life.

Benefits

Allows safe impeller removal and installation, prevents damage to expensive performance impellers, and simplifies jet pump maintenance and upgrades.

Compatible Applications

Common Yamaha applications include:

  • Yamaha GPR1200
  • Yamaha GPR1300
  • Yamaha FX140
  • Yamaha FX HO
  • Yamaha FX Cruiser HO
  • Yamaha XLT 800
  • Yamaha XLT 1200
  • Yamaha GP1200R
  • Yamaha GP1300R
  • Yamaha FX Series
  • Other Yamaha Models Using 155mm Pumps

Compatible Impellers

Designed for use with:

  • Skat-Trak Yamaha 155mm Performance Impellers
  • Skat-Trak Swirl Series Impellers
  • Skat-Trak Performance Racing Impellers

Recommended Companion Tools

For complete impeller service, we recommend:

  • WR007H Driveshaft Holding Tool (22mm Shaft Applications)
  • WR014H Driveshaft Holding Tool (25mm Shaft Applications)

Using the proper driveshaft holding tool makes impeller removal and installation faster, safer, and easier.

Common Uses

  • Impeller Removal
  • Impeller Installation
  • Jet Pump Rebuilds
  • Wear Ring Replacement
  • Pump Bearing Service
  • Performance Upgrades
  • Routine Maintenance

Why Use the Correct Impeller Tool?

Using the proper impeller tool helps prevent damage to expensive performance impellers while ensuring safe and efficient service. The SYT22/25 is specifically designed for compatible Skat-Trak Yamaha impellers and provides secure engagement during installation and removal.

Part Number

Skat-Trak SYT22/25 (SYT22)

Model Years

  • 2000
  • 2001
  • 2002
  • 2003
  • 2004
  • 2005
  • 2006
  • 2007
  • 2008
  • 2009
  • 2010
  • 1999

Engine

1100|1200|1300|800|998

FAQs

See All

How do I change the impeller in my craft?

Impros has complete impeller installation instructions for Yamaha, Sea-Doo, Kawasaki and Polaris PWC. See Impeller Installation instructions for the person that likes to get in there and do things themselves.

Does Impros balance each impeller they service?

Yes. Each and every impeller that we service is checked for accurate balance within 2/10ths of a gram. Slight rock damage and especially with impellers requiring weld, checking the balance is absolutely required with PWC impellers. Sometimes we’ll find new impellers out of balance right out of the box. We balance each impeller as the finish is applied, eliminating any chance of throwing it out of balance during the polishing process. These measures are proudly taken to insure our customers the highest quality impeller repair available. Ask our competition if and how they balance impellers, we’ve found that they typically rely on the original factory balance.

Does Impros use correct pitching techniques specific to each brand of impeller?

Yes, Impros is proud of our ability to pitch each brand impeller to the manufacture’s specific range of blade angle variation. Impros has a master gauge for every stainless-steel impeller made, assuring an accurate pitch and uncompromised performance, eliminating common guesswork. Each and every manufacturer builds the impeller geometrically different from one another and gauges the outer blade angle in a different way. Only a company with experience will accurately understand, manipulate and repair the blades of the impeller to its original state.

Customer Reviews

  • The best there is!! If you want true personalized impeller and/or pump service this is it. One word describes it all: Quality."
    testimonial author avatar
    Tim C.
    Verified Customer
  • "Big thank you to Glen for the quick turnaround, outstanding customer service, and honesty. I ended up choosing the race finish and couldn't be happier with the final result!"
    testimonial author avatar
    C. Kunamay
    Verified Customer
  • "Solid support when I had an issue. Immediately fixed. Wish all businesses operated like this, thanks!"
    testimonial author avatar
    John H.
    Verified Customer