Impros Yamaha Hooker Impeller

For 10 straight years, the Hooker impeller has been the impeller of choice for maximizing bottom end and pump hook up for your Yamaha! Set back, and a large hub design that works with your stock 144mm pump, Skat Magnum, or Solas 12 vane stator, this impeller will get you max airtime!

impros

In stock
SKU
ImprosyamahaHookerImpeller
$310.83

Maximum 150 characters

The Impros Hooker 144mm impeller for the Yamaha is a 3 blade large hub diameter, radial edge design stainless steel impeller designed and intended for Bottom end and "Hook up" for freestyle and freeriders on a Superjet, Blaster, or similar ski that utilizes the 144mm pump and want maximum AIR for tricks. We gave it this name because it "Hooks Up" so well. Designed around maximizing pump efficiency and bottom end, this is a new radial edge design, large hub (75mm), and is set back 5mm (2mm further than we can go with a small hub impeller). It is a rec finish Yamaha impeller that we will have available for the 144mm stock pump, and 144/142/140mm Magnum pump. Designed with a steep root angle to load the pump well. Material is a 17-4 stainless steel cast. Dynamically balanced, comes with our Recreation polish, and with an impeller tool and rubber nose seal. We have it available in a variety of pitches for different engine set ups. The pitches available are 9/15, 10/16 and 11/17. These numbers are much different from other impeller pitches you have heard of. While they are very low, and directed at bottom end "Hit", the root angle, blade length and other geometric differences set the Hooker apart from the others. We also produce "more aggressive" custom pitch Hookers for engines that require it, for an additional charge. To give you an idea of the load on the engine, the 9/15 loads similar to the custom Solas 13/15 that we do. Further set-back increases the pump efficiency, along with the larger hub and blade length. We're excited about how this impeller works compared to the other popular repitched impeller versions that have become so popular. Please don't misunderstand, they work very well, this one just works better, and gives the ski more "pop". The 10/16 and 11/17 Hooker has also been one of the most competitive impellers used for closed course racing limited and spec class Super jets and Blasters. As stated above, they fit in the stock 144mm Yamaha pump, Solas 12 vane pump, Skat Trak Magnum pumps (with a shim), and TBM Super Pump Cones. We recommend also buying a Driveshaft holding tool as well, for ease of installation. Want peace of mind with your purchase? Every impeller that you buy from Impros is quality checked to assure you that the blade pitch and balance of your impeller is correct, at no additional charge. Only a company with our experience and expertise can offer this unique value! Check out our application charts below to see which Impros Hooker impeller is best suited for your Yamaha Waverunner!

Need Help choosing the right impeller? CLICK HERE

More Information
SKU ImprosyamahaHookerImpeller
Pitch IMY-144-10/16 (10/16 pitch), IMY-144-11/17 (11/17 pitch), IMY-144-9/15 (9/15 pitch)
Engine CC 650, 701, 754, 760, 784, 800
Year 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Impeller Manufacture Impros
Yamaha Model GP 760, GP 800, Super Jet, VXR/Pro VXR, Wave Blaster, Wave Raider 700/Deluxe/760, Wave Runner 3/GP, Wave Venture 700
Write Your Own Review
You're reviewing:Impros Yamaha Hooker Impeller

Website Designed by www.overnightgrafix.com 909-477-0620